Our Dayton Mold Services
From inspections and remediation to air quality improvement, mold prevention, and full decontamination, Ram Mold Pro provides complete Dayton Mold Services to keep your property safe and healthy. Serving Dayton, Cincinnati, and surrounding communities with trusted expertise and professional care.
OUR PROCESS
Our Dayton Mold Services Remediation Process
Mold can begin spreading within 24 to 72 hours, thriving anywhere moisture is present—from wood and carpet to paper and even food. If you suspect mold in your home or business, our Dayton Mold Services experts are here to help. We start with a detailed inspection to identify visible mold and locate hidden moisture sources. Using advanced detection methods, our certified team ensures nothing is overlooked. Once identified, we guide you through a safe and efficient cleanup and remediation process, restoring your property with minimal disruption.
Inspection & Assessment
We start with a thorough mold inspection to identify problem areas, detect hidden growth, and evaluate air quality. Our experts use advanced tools to pinpoint the source and extent of contamination.
Safe Mold Remediation
Our certified team contains, removes, and disinfects affected areas using industry-approved methods. We eliminate mold at the root cause to prevent it from spreading or returning.
Prevention & Restoration
After removal, we restore clean air quality and apply preventative measures to keep your home or business safe. This includes moisture control, decontamination, and post-remediation testing.
Our Case Studies
Before our team stepped in, this facility was struggling with dangerous bacteria, high particle load, and unhealthy bio levels threatening both safety and productivity. After treatment, the transformation was undeniable. Cleaner air. Safer workspaces. A facility restored to the highest standards of health and compliance.
| BAMS Analysis Reading Before | |||
|---|---|---|---|
| 0.5 Bacteria |
42498 | 7256 | 17.1% |
| 1.0 Bacteria |
19947 | 8476 | 42.5% |
| 2.0 Bacteria, Mold, Mildew, Fungus |
4199 | 2696 | 64.2% |
| 3.0 Mold, Mildew, Fungus |
3071 | 1657 | 54.0% |
| 5.0 Mold, Mildew, Fungus |
2351 | 652 | 27.7% |
| 10.07 Pollen & Yeast |
339 | 46 | 13.6% |
| BAMS Analysis Reading After | |||
|---|---|---|---|
| 0.5 Bacteria |
33504 | 5167 | 15.4% |
| 1.0 Bacteria |
18685 | 7844 | 42.0% |
| 2.0 Bacteria, Mold, Mildew, Fungus |
3361 | 2279 | 67.8% |
| 3.0 Mold, Mildew, Fungus |
2219 | 1230 | 55.4% |
| 5.0 Mold, Mildew, Fungus |
1526 | 447 | 29.3% |
| 10.0 Pollen & Yeast |
315 | 68 | 21.6% |
| Reduction Analysis Results | ||||||
|---|---|---|---|---|---|---|
| Micron Size | Particle Load Pre | Particle Load Post | % Reduction | Bio Load Pre | Bio Load Post | % Reduction |
| 0.5 | 42498 | 33504 | 21.6% | 7256 | 5167 | 28.8% |
| 1.0 | 19947 | 18685 | 6.3% | 8476 | 7844 | 7.5% |
| 2.0 | 4199 | 3361 | 19.96% | 2696 | 2279 | 15.5% |
| 3.0 | 3071 | 2219 | 27.74% | 1657 | 1230 | 25.8% |
| 5.0 | 2351 | 1526 | 35.09% | 652 | 447 | 31.4% |
| 10.0 | 339 | 315 | 7.08% | 46 | 68 | -47.8% |
Before our intervention, the facility faced alarmingly high particle and bio-load levels, with bacteria counts exceeding 535,000 particles at 0.5 microns and significant mold, mildew, and fungal presence across multiple micron sizes. These unsafe conditions posed serious risks to both health and productivity. After our advanced treatment, the results were transformative—particle loads reduced by up to 88–90%, and bio-load levels cut down by more than 80–90% across critical size ranges. The air is now cleaner, the environment safer, and the facility fully restored to the highest standards of health, safety, and compliance.
| BAMS Analysis Reading Before | |||
|---|---|---|---|
| Micron Size | Particle Load | Bio Load | Ratio Bio to Particle |
| 0.5 Bacteria |
535139 | 72652 | 13.6% |
| 1.0 Bacteria |
123939 | 30591 | 24.7% |
| 2.0 Bacteria, Mold, Mildew, Fungus |
11769 | 6912 | 58.7% |
| 3.0 Mold, Mildew, Fungus |
4086 | 2271 | 55.6% |
| 5.0 Mold, Mildew, Fungus |
1153 | 209 | 44.1% |
| 10.0 Pollen & Yeast |
185 | 32 | 17.3% |
| BAMS Analysis Reading After | |||
|---|---|---|---|
| Micron Size | Particle Load | Bio Load | Ratio Bio to Particle |
| 0.5 Bacteria |
98410 | 12275 | 12.5% |
| 1.0 Bacteria |
17861 | 4226 | 23.7% |
| 2.0 Bacteria, Mold, Mildew, Fungus |
1365 | 690 | 50.5% |
| 3.0 Mold, Mildew, Fungus |
614 | 227 | 37.0% |
| 5.0 Mold, Mildew, Fungus |
294 | 66 | 22.4% |
| 10.0 Pollen & Yeast |
116 | 16 | 13.8% |
| Reduction Analysis | ||||||
|---|---|---|---|---|---|---|
| Micron Size | Particle Load-Pre | Particle Load-Post | % Reduction | Bio Load-Pre | Bio Load-Post | % Reduction |
| 0.5 | 535139 | 98410 | 81.61% | 72652 | 12275 | 83.1% |
| 1.0 | 123939 | 17861 | 85.59% | 30591 | 4226 | 86.2% |
| 2.0 | 11769 | 1365 | 88.40% | 6912 | 690 | 90.0% |
| 3.0 | 4086 | 614 | 84.97% | 2271 | 227 | 90.0% |
| 5.0 | 1153 | 294 | 74.50% | 509 | 66 | 87.0% |
| 10.0 | 185 | 116 | 37.30% | 32 | 16 | 50.0% |