Most homes go through a real shift once the weather turns and heating season sets in: the house is occupied less actively during the day, windows are shut for longer stretches, and there are simply more quiet, low-activity hours than during the warmer months. That shift matters more for humidity than most people realize, and it’s specific enough that ASHRAE, the industry association that sets much of the engineering guidance for how buildings actually manage air, has a defined position on it.
ASHRAE’s position document on limiting indoor mold and dampness recommends “keeping humidity below a maximum dew-point temperature of 60°F (15°C) during unoccupied hours.” That’s a more specific target than a general relative-humidity percentage, and it’s aimed specifically at the quiet stretches, overnight, or while a house sits empty during a workday, when there’s less air movement and less opportunity for moisture to get addressed in the moment.
The same document is direct about why this matters at all: “persistent indoor dampness is neither normal nor desirable and can lead to health risks for occupants in the short term and ultimately to structural risks.” That’s a notably firm statement from an engineering association not prone to overstatement, and it reflects a real professional consensus that dampness isn’t just a comfort issue, it’s a condition worth actively managing rather than tolerating as an unavoidable side effect of the season.
A question we hear often: isn’t overnight humidity basically the same as daytime humidity in a closed-up house? Not necessarily, and that’s part of why ASHRAE calls it out specifically. Overnight, temperatures drop, which changes the relationship between the air’s actual moisture content and its dew point, the temperature at which that moisture starts condensing onto surfaces. A house that seems fine during an active afternoon can still cross into condensation-favorable conditions overnight on cooler surfaces, exactly the kind of hidden shift a thermal imaging reading like the one pictured here is built to catch, since it can reveal a temperature and moisture pattern that wouldn’t be obvious just by touching a wall in daylight.
This connects directly to the practical reality of closing up a house for the season. Fewer open windows means less natural air exchange removing moisture, and more unoccupied hours means more time for humidity to sit and settle without anyone actively noticing or intervening. A laundry area like the one pictured, which generates real moisture from washer and dryer use, is a specific example of a space that can accumulate humidity during exactly those quiet in-between hours if it isn’t getting enough air movement relative to how much moisture it produces.
None of this requires monitoring a house around the clock. It does mean that the rooms most likely to sit quiet and humid overnight, a laundry area, a basement, a room with minimal airflow, deserve more attention as the season shifts, precisely because the usual daytime cues (a room feeling obviously damp, visible condensation someone happens to notice) are less reliable during the hours nobody’s actually there to notice them.
If a room’s been feeling more humid since the house closed up for the season, it’s worth a real look: 888-609-6653 or www.rammoldpro.com
Dealing with water, fire or storm damage? Contact our sister company, Ram Restoration, at www.ramrestorationusa.com/contact/
Related reading
- Does Closing Your Windows for the Season Quietly Raise Your Indoor Mold Risk?
- The Dayton Fall Transition, By the Numbers, and What It Means Indoors
- Is Your Bathroom Fan Actually Running Long Enough to Matter?
- All Ram Mold Pro articles
FAQ’s
What humidity should a house be kept at when no one is home?
ASHRAE recommends keeping indoor humidity below a maximum dew-point temperature of 60°F during unoccupied hours, a more specific target than a general daytime humidity range.
Is persistent indoor dampness normal?
ASHRAE’s position document states that persistent indoor dampness is “neither normal nor desirable” and carries both short-term and structural risk implications.
What are early warning signs of moisture problems?
ASHRAE’s guidance flags sustained elevated moisture content in materials like gypsum board as an early warning sign worth monitoring, separate from a visible mold finding.
Sources: ASHRAE, Position Document on Limiting Indoor Mold and Dampness in Buildings (approved November 2021, reaffirmed October 2024)

